Dongfeng Nissan 12m high -altitude operation truck
is made by our factory using Zhengzhou Nissan Automobile Co., Ltd.'s original ZN1050B5ZM chassis. The vehicle has a beautiful appearance, powerful functions, and high safety factor. It has a number of advanced operating safety functions to ensure the safety of the operator's work. There are operating devices in the working tank and the slewing seat, which remotely control the start / stop of the engine, High speed / low speed, using electro-hydraulic proportional valve to control the movement of the arm, with good stability. The working arm can rotate left and right 360 ° continuously, relying on the linkage mechanism to automatically maintain the level of the working tank. When the main pump fails, the emergency pump can be operated to lower the working tank. It is illuminated at night and can lift 1 ton of weight (optional). The products are widely used in high-altitude operation fields such as electricity, street lights, municipal administration, gardens, communications, airports, shipbuilding (repair), transportation, advertising, photography, etc. It is an ideal vehicle for high-altitude operations such as electric power maintenance and road sign installation by municipal administration, power supply maintenance, and traffic management departments. Sales Hotline: 13978888036
| Jiangte JDF5052JGKZN4 aerial work vehicle |
【The main technical parameters】
型高空作业车 JDF5052JGKZN4 Aerial Work Platform
Total weight (Kg)
Tank volume (m3)
Rated load (Kg)
7300 × 1990 × 3200
Curb weight (Kg)
Cargo compartment size (mm)
人) Rated passenger ( person )
Total mass of quasi-trailer (Kg)
人) Cab number of passengers ( person )
3 + 3
Load mass utilization factor
离去角(°) Approach / departure angle (°)
后悬(mm) Front / rear suspension (mm)
Number of axes
Axle load (Kg)
Maximum speed (Km / h)
前伸: Optional hook ; forward extension : 450mm 后伸: , Back extension : 580mm 侧面防护及后下部防护装置材料材质:Q235,连接方式:焊接加螺栓连接;后下部防护装置断面尺寸(宽×高):30×190(mm),后下部防护装置离地高度: Material of side protection and rear lower protection device : Q235, connection method : welding and bolt connection ; section size of rear lower protection device ( width × height ): 30 × 190 (mm), height of rear lower protection device above ground : 470mm .
[Chassis technical parameters]
Truck chassis (type 2)
Zhengzhou Nissan Automobile Co., Ltd.
5954 × 1890 × 2237
Number of tires
离去角(°) Approach / departure angle (°)
Number of leaf springs
6/5 + 5
Front track (mm)
Rear track (mm)
国Ⅳ,GB3847-2005 GB17691-2005 National IV, GB3847-2005
Dongfeng Light Engine Co., Ltd.
1. The internationally leading Nissan high-end chassis is equipped with a special hydraulic lifting device with two sections of folding arms. The vehicle is integrated and designed with strong bearing capacity and high reliability;
2. Environmental protection items meet national vehicle emission standards for the fourth stage (national IV)
3. The lifting hydraulic cylinder adopts imported seals, and the workpiece bucket makes a smooth transition during lifting and rotating, without shaking and shaking, and better safety;
4. H 型液压支腿，跨距大，稳定性更强，支腿即可独立伸缩，又可联动，装有支腿报闪灯，用于作业时支腿示廓，发出光报警信号； Four H -shaped hydraulic outriggers are installed with the vehicle , which has a large span and greater stability. The outriggers can be independently extended and retracted, and can be linked. They are equipped with outrigger flashing lights, which are used to display the outriggers during operation. Alarm;
5. 360 度旋转，可选装吊钩，吊钩吊 1 吨； The lifting system adopts two sections of folding arms, the working platform can realize 360- degree rotation, and optional hooks can be installed .
6. It has an operating system on the top and bottom, and a control device in the working bucket, which can control lifting, rotating in the working bucket;
7. The lifting truck has a simple operation structure, convenient operation, safety and reliability, and beautiful appearance, and is widely applicable to high-altitude operations in various systems such as municipal administration, electric power, street lamps, advertising, photography, communications, gardens, transportation, industrial and mining, and docks.
消防车 、 清障车 、 高空作业车 、 消防洒水车 、 洒水车 、 扫路车 、 垃圾车 、 随车起重运输车 、 爆破器材运输车 等数百品种，车型已全部上国家公告目录，取得 ISO9001-2000 质量管理体系认证，产品通过 CCC 认证。 Hubei Jiangnan Special Special Vehicle Co., Ltd. is a designated manufacturer of the National Development and Reform Commission, and the only special-purpose vehicle capital that has obtained fire truck production qualifications. Dongfeng, Jiefang, Sinotruk, Isuzu and other auto companies have provided matching modification plants. The main products produced are Hundreds of types such as wrecker trucks , aerial work trucks , fire sprinklers , sprinklers , road sweepers , garbage trucks , on- board crane trucks , blasting equipment trucks, etc. All models have been listed in the national announcement catalog and obtained ISO9001-2000 Quality management system certification, products passed CCC certification.
(0)13997888036 Mobile: (0) 13997888036 (0) 13997888037
0722-3808778 Phone: 0722-3808778 0722-3808778 (fax)
245393347 QQ : 245393347 826802306
cqqslt.com Website: cqqslt.com email@example.com Email: firstname.lastname@example.org